MIL-M-80269
provided for converting specified programming language (see 6.2.1) to the
form and format required to operate the machine tool and control. The post-
processor shall be written for use on the type computer specified (see
6.2.1).
3.4.11
Standard equipment.
Unless otherwise specified (see 6.2.1) , the
following equipment shall be furnished with the machine:
A load meter installed on the machine or MCU console that constantly
a.
registers the horsepower load (horsepower units or percent of load)
on the spindle rotation drive motor.
One set of special wrenches, operating,
and repair tools that are
b.
normally furnished by the manufacturer.
3.4.12
Optional equipment.
The following optional equipment shall be
furnished as specified (see 6.2.1):
a.
A worklight, conveniently mounted to illuminate the work area,
complete with protective shield and on-off switch.
Tools , tool holders, and adapters, as specified.
b.
Other optional equipment, as specified.
c.
3.5 Sizes and capacities.
Unless otherwise specified (see 6.2.1), the
sizes and capacities of the machining center shall meet the requirements of
table II as specified for the machine size specified in the contract or
order.
3.6 Performance.
The machine and numerical control system combination
In addition, the
shall be capable of performing as specified herein.
machine shall be capable of performing drilling, tapping, milling and boring
to accomplish the capacities of table II while meeting the accuracies of
table III.
3.7 Alignment. The machine and numerical control system shall meet the
alignment and accuracy tolerances of table IV.
3.8 Marking on plates, charts, and decals. All words on plates, charts,
Characters shall be engraved,
and decals shall be in the English language.
etched, embossed, or stamped in boldface on a contrasting background. When
these methods are not practical, the instructions shall be applied directly
onto the item by environmentally protected decalcomania transfer, metal
wrap-around tag, stencil, silk screen, or by any other method suitable for
the use intended which shall be as permanent as the normal life expectancy
of the item to which it is applied and capable of withstanding the environ-
mental test and cleaning procedures specified for the item.
17
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business